RENU RTU Safe Acid Replacement Grout/Tile Restorative Cleaner. Great for Detailing and Cleaning Grout Lines

NON-CORROSIVE ACID REPLACEMENT CLEANER FOR TILE & GROUT RESTORATION

WHERE USED:

Use on tile and grout lines (sand based and non-sand based grout).

HOW USED:

Spray or mop on diluted mix of “RENU” and allow a dwell time of approximately
15 minutes.

FEATURES:

• Removes all staining to make grout look new again.  This 2 in 1 product removes dirt, oil, and grease from tile and grout while removing unsightly stains from grout. 
• Restores tile to its original factory condition.
• Increases slip resistance without damaging factory tile specs.
• Does not etch glazed tile.
• DOT Classification: The only acidic technology that can be shipped as non-regulated via ground transportation
• Excellent environmental and safety profile (Classified as non-irritating to skin).
• No VOC’s and phosphate free.
• Do not use on metals such as aluminum, copper, chrome, stainless steel.
• Non-fuming, non-toxic, non-flammable.
• Free rinsing.

DIRECTIONS:

Dilute 1 part “RENU” to 3 parts water. Spray or mop diluted solution onto tile and grouted
surface. Allow solution to dwell for approximately 15 minutes. After solution has time to dwell
grout should be brushed to complete the break-up of contaminates that are the cause for
the unsightly grout appearance. After brushing grout lines, a wet vacuum should be used to
pick up slurry left behind by the cleaning process. Follow the vacuuming process with a
clear water rinse. Grout is now free of stains and contaminates with a like new appearance.